As an Amazon Associate I earn from qualifying purchases.1. Fuhuihe
Fuhuihe 12V/24V MTTP Solar Charge Controller Solar Panel Battery Charger Intelligent Regulator with Dual USB Port LCD Display Overcurrent Protection for Home, Commercial blue, Industry, 40A
Fuhuihe - This controller can charge and discharge at the same time. Mppt solar charge controller mppt10-60: compared with normal solar charge controller, this MPPT controller could increase efficiency by 10%-30%. When the battery voltage is low, the controller will automatically cut off the load from the system.
If the voltage of battery is back to normal and the load will restart working. Prevent the battery from over-charging, over-discharging and reverse charging to solar panels during nights. This mppt controller has perfect SOC function, control charge current, and supply power to the loads.
2. EP Solar
Solar Charge Controller Max 100V Input Negative Grounded Solar Regulator 30A for Lead-Acid and Lithium Batteries, 30A MPPT Solar Charge Controller 12V 24V Auto
EP Solar - Support for 4 type battery charging and dischargeing: lead-acid sealed, Gel, Lithium and User-defined. Multiple load control modes: manual control, light On+Timer and test mode. The tracer an's charging process has been optimized for long battery life and improved system performance.
It includes a 4-stage battery charging Bulk, Boost, Float, and Equalization and temperature compensation increase your battery life and improve your system's performance.
New upgraded epever mppt charge controller 30amp tracer3210an, max input solar panels power 390w/780W Charging for 12V/24V battery system, Max. Pvvoc 100v, common negative Grounding, High tracking efficiency no less than 99.
5%. Compatible with agm batteries, Flooded, User mode allow you set your own charging parameters. Lcd panel display design, light on/off, dynamically displaying tool’s operating data and working condition. Battery temperature compensation function(only for Lead-acid battery). With rs-485 communication bus interface and Modbus communication protocol. Monitor and set the parameters via remote meter MT50 or mobile phone APP or PC software.
Brand | EP Solar |
Manufacturer | EP Solar |
Height | 5.59 cm (2.2 Inches) |
Length | 22.86 cm (9 Inches) |
Width | 16.51 cm (6.5 Inches) |
3. EPEVER
20A MPPT Charge Controller 12V/24V Auto, 20 amp Solar Panel Charge Controller Mppt 100V PV Input Negative Grounded Solar Regulator
EPEVER - 20 amp solar charge controller max input solar panel power: 260W/12V, 520W/24V. Real-time energy recording and statistical. Available to meet various communication requirements in different situations.
Auto control system to limit the charging power & current go over the rated value. Max input Voltage: 100V. Solar rv, household system and industrial field monitoring. Solar panel charge regulator with rs485 interface, it can be monitored by cellphone APPeBox required, PC Software and MT50 remote meter.
Mppt charge controller 20a : 12v / 24v auto identifying system volt.
20a solar controller mppt support for 4 type battery charging: lead-acid sealed, AGM, Flooded, Gel, User and Lithium. Solar charge controller can be widely used for various applications, e. G. Battery temperature compensation function to ensure the controller’s life. It protect the battery from being over-charged by the solar modules and over-discharged by the loads.
4. Photonic Universe
Photonic Universe 10A MPPT solar charge controller/regulator with built in LCD display for solar panels up to 130W 12V battery system / 260W 24V battery system up to 100V
Photonic Universe - This controller uses the most advanced MPPT technology to ensure high efficiency >95% of your solar system. Comprehensive set of electronic protection functions e. G. Suitable for solar panels up to 130w 12v battery or battery bank or 260W 24V system.
Multiple connectivity options for the controller remote meter, mobile app, PC software - see below enable the user to personalise each charging stage, create a user-defined battery type with specific parameters and access exclusive settings.
Built-in lcd screen displays key charging parameters. Scroll down to Product Description for more information about this product.
Current limiting function 10A allows possibility of adding more solar panels in the future. Significantly outperforms standard PWM controllers. Stops reverse current at night from the battery back to the solar panel, over load, solar panel over voltage, automatic cut off to prevent over-charging and deep discharge, short circuit and reverse polarity protection.
5. Anancooler
Anancooler Fuhuihe Solar 60A Solar Charge Controller 12V 24V with Dual 5V USB Output Backlight LCD Display Solar Panel Charging Discharge Regulator Multi Circuit Protection Off Grid System
Anancooler - This product has multiple protection like over-charge Protection, Low-Voltage Protection, Over-Load Protection, Over-Discharge Protection, Short-Circuit Protection and Reverse-Connect Protection.2 years warranty, lifetime Technical Support, 8 Hours Quick Response.
Large power 60 amp solar charge controller, 12V/24V Auto Identification, Dual USB OutPut. Mppt charging efficiency, Fast Charging Technology, Meet the needs of Large Power. White lcd with backlight function, Easy to Operate the Controller under the environment of insufficient light.
6. linjunddd
Solar MPPT Charge Controller 12V/24V Solar Panel Battery Charge Regulator 60A with LCD Display USB Port for Industry
linjunddd - Solar panel battery charge regulator has Auto-focus MPPT tracking charging, high charging efficiency, non-stop detection during the charging process and two-way focus tracking. 40a solar controller has complete 3-stage charging management, which effectively protects the battery and makes the battery more durable, locked by the CPU procedure, and According to the battery voltage grade, the load- restore voltage.
Solar charge controller has thunder protection, discharging current and the power generation at a glance and will automatically compensates the temperature of the charging voltage according to the changes of ambient temperature; has Bidirectional MoS tube anti-backflow circuit, charging current, high-power charging mode, accurate real-time display of temperature, ultra-low heat.
Solar mppt charge controller is made of durable abs material and always keeps the battery on fill voltage condition, has Large-screen LCD display, and UItra-wide charge and discharge adjustable, adjustable charging and discharging parameters, Prevents the battery from over-charging, over-discharging and reverse charging to solar panels during nights, as long as you understand the characteristics of the battery set its.1
12v/24v solar charge regulator has industrial-grade main control chip, it will automatically close off the load from the system, 16-level AD sampling accuracy, open circuit protection, and When the battery voltage is low, Reverse Polarity Protection for Battery and Solar Panels, overcurrent short circuit, and the load will restart working If the voltage of battery is back to normal; has Built-in overheating, reverse connection. The parameter is default under 25℃ condition, it can automatically set charge-off voltage, the load-off voltage, cannot adjust.
Brand | linjunddd |
Manufacturer | linjunddd |
Height | 6 cm (2.36 Inches) |
Length | 17 cm (6.69 Inches) |
Weight | 0.28 kg (0.61 Pounds) |
Width | 9.5 cm (3.74 Inches) |
Part Number | 12.2-LT-PQ382 |
7. ZJP-dzsw
ZJP-dzsw MPPT Solar Charge Controller 12V/24V/48V Auto Solar Panel Battery Regulator Solar Charge Controller with WIFI GPRS 30A/40A/50A LCD Display Solar energy
ZJP-dzsw - Air cooling heat dissipation. Support for data storage, storage time can be up to 10 years. With current-limiting charging mode, charging current exceeds rated current of the controller, when input power of photovoltaic panels is too large, it will limit the charging current to rated current charge.
Remote monitoring by three ways: computer monitoring; WIFI by mobile phone; GPRS by mobile phone. Four sections of charging ways: MPPT charge- equalizing charge- improving charge- floating charge. 12/24/48v automatic identification function.
8. Reminnbor
MPPT Solar Panel Regulador 12V/24V MPPT Solar Charge Controller LCD Screen Auto Battery Controller60A
Reminnbor - Pcb circuit board, anti-aging, military quality, effectively improve A full level. Solar panel regulador is very versatile and is an upgraded product of the traditional solar charge and discharge controller. Dual usb port output is more convenient, in line with the current needs of various electronic products.
Clear led large display with digital display, charging identification, load identification, voltage, battery level identification, etc.100% brand new high quality, high quality products provide you with high quality assurance.
Brand | Reminnbor |
Manufacturer | Reminnbor |
Height | 10 cm (3.94 Inches) |
Length | 10 cm (3.94 Inches) |
Weight | 0.1 kg (0.22 Pounds) |
Width | 10 cm (3.94 Inches) |
Part Number | Reminnbor32v8iyhbz7-04 |
9. ZJP-dzsw
ZJP-dzsw MPPT Solar Charge Controller 12V/24V/48V Auto 30A-60A Solar Panel Battery Regulator with Max150V PV input LCD Display Multiple options Solar energy Color : 60A
ZJP-dzsw - Communication function: RS485 and USB to RS232. Working temperature: -20℃~50℃. Size: 280*225*114mm. Weight: 6. 55kg. Rated voltage: 12v/24v/48v auto.
Max pv input power: please refer to the picture. Max pv voc: 150v DC. Charging mod: mppt Maximum Power Point Tracking. Rated current: 30a/40A/50A/60A.
10. ZJP-dzsw
ZJP-dzsw MPPT Solar Charge Controller 12V/24V/48V Auto 10A-40A Solar Panel Battery Regulator with Max150V PV input LCD Display Solar energy Color : 10A
ZJP-dzsw - Max pv voc: 150v DC. Weight: 2. 15kg. Rated voltage: 12v/24V/48V Auto. Charging mod: mppt Maximum Power Point Tracking. Size: 193*185*80mm. Working temperature: -20℃~50℃. Max pv input power: please refer to the picture. Protection Level: IP32.