As an Amazon Associate I earn from qualifying purchases.1. Blue Print
Blue Print ADV1848601 Fitting Kit for brake pad set, pack of one
Blue Print - Fitting side: Rear Axle. Genuine blue print Replacement Part - Right First Time. Model number: adV1848601.
| Brand | Blue Print |
| Manufacturer | Bilstein Group |
| Height | 8.22 cm (3.24 Inches) |
| Length | 27.99 cm (11.02 Inches) |
| Weight | 0.03 kg (0.07 Pounds) |
| Width | 18.25 cm (7.19 Inches) |
| Part Number | ADV1848601 |
| Model | ADV1848601 |
2. Borg & Beck
Brake Pads Fits: Vauxhall Vectra/Omega 94-
Borg & Beck - Copper free – environmentally friendly, less corrosive on Disc compared to more coarse formulations as seen on alternative pads. Integral wear leads, sensors, bolts and accessories to match OE product offer where required.
Becktec double rubber shimmed, designed by world leaders to provide improved noise reduction and anti-rattle qualities. Highly specified compound made from fine metallic fibres consistent with OE formulation. Chamfered and grooved to match consistency of OE design.
| Brand | Borg & Beck |
| Manufacturer | First Line |
| Height | 8.2 cm (3.23 Inches) |
| Length | 15 cm (5.91 Inches) |
| Width | 10.3 cm (4.06 Inches) |
| Part Number | BBP1605 |
| Model | BBP1605 |
3. Bosch
ECE-R90 Certified, Bosch BP1763 Brake Pads, Rear Axle, 1 Set of 4 Pads
Bosch - Optimized comfort : premium noise and judder behaviour, good and comfortable pedal feel. Safety first : consistent braking performance in any situation. Optimal performance and safety from the very first braking operations thanks to the Bosch brake pad scorching process. Copper-free pads
| Brand | Bosch |
| Manufacturer | Bosch |
| Height | 9.98 cm (3.93 Inches) |
| Length | 24.31 cm (9.57 Inches) |
| Weight | 0.13 kg (0.28 Pounds) |
| Width | 15.38 cm (6.06 Inches) |
| Part Number | 0986494748 |
| Model | 0986494748 |
4. Borg & Beck
Pads Fits: Audi, Peugeot, Fiat, Ford, Borg & Beck Fitting Kit
Borg & Beck - Contains the additional springs, clips and fixings etc that need replacing during a brakes service to conform to best practices. Suitable for either the front or rear axle of the vehicles listed.
All components conform to current European Commission Block Exemption Regulations. This product consists of a kit of high quality brake pad accessories. And are designed to balance performance against extended service life.
5. CGEAMDY
Durable Non-Slip Foot Pedals Pads, CGEAMDY 2 pcs Universal Auto Aluminum Pedal Covers, Brake Accelerator Pedal Covers Aluminum Car Accessories Suitable for Foot Pedal Pad ReplacementRed
CGEAMDY - Easy installation: without drilling or welding, Remove the original pedal cover and install the new Car Non-Slip Aluminum Alloy Pedial Pads. Scope of application: the accelerator pedal cover measures 11. 5 × 5. 5cm, the brake/clutch pedal cover measures 102 x 7.
5cm, pedal covers fit for the tesla model 3/Y 2019-2023Make sure the car model and size fit your car's pedals before buying. Multi-color selection: avariety of color options, Red and Black, including silver, beautify your car interior and make your car more stylish and cool.
This is the perfect car accessory, Anti-Slip Performance Pedal Cover Kit is the best gift for friends and family. Non-slip car floor mATS provide effective support for your feet without slipping due to moisture.
High quality: the upgraded accelerator brake pedal is made of a Premium Aluminum Alloy Panel with a more delicate texture from the frosted surface, The brake pedal pad cover can prevent rust and durability, prevent fracture and deformation. Safe driving: anti-skid car mat silicone anti-skid strip design, enhance friction, 5 strips for the accelerator pedal, and 8 strips for the brake pedal, provide good anti-skid effect to ensure safe driving.
| Brand | CGEAMDY |
| Manufacturer | CGEAMDY |
| Part Number | CGEAMDY-Pedal1 |
| Model | CGEAMDY-Pedal1 |
6. Borg & Beck
Fitting Kit, Pads Fits: Alfa, Vauxhall, Fiat, Opel
Borg & Beck - Contains the additional springs, clips and fixings etc that need replacing during a brakes service to conform to best practices. Suitable for either the front or rear axle of the vehicles listed.
All components conform to current European Commission Block Exemption Regulations. And are designed to balance performance against extended service life. This product consists of a kit of high quality brake pad accessories.
7. CGEAMDY
Universal Ratcheting Caliper Piston Compressor Wrench for Car Brake Repair and Replace Blue, CGEAMDY Brake Piston Compressor Wrench, Car Brake Caliper Press Tool, 360 Degree Ratchet Swing
CGEAMDY - Application: it is suitable for single-piston, two-piston and four-piston floating calipers, and is suitable for most vehicles with fixed or floating calipers. Can swing 360 degrees, which allows the spreader to be placed in any position. Easy to use: it can be adjusted back and forth for quick disassembly and assembly.
There is a rubber sleeve at the handle, which is strong, which is easy to use, not easily fatigued for long time use, and improves work efficiency. Function: this brake piston compressor wrench is mainly used to push back the brake piston, replace the brake pads, it is an essential car gadget for garage and personal repair, repair and install the brake cylinder of the car, very practical.
It can distribute the force evenly to each piston quickly and easily.
Material: our brake piston compressor wrench is made of carbon steel, comfortable in hand, corrosion resistant and sturdy. Size: the brake piston compressor wrench measures 23 x 2. 8cm, manufactured with reference to the classic market size, superior material, excellent performance, there is no gap in specifications, and completely safe to use. Even if it is difficult to get in and out, you can easily find the right angle to insert the tool into the brake caliper.
| Brand | CGEAMDY |
| Manufacturer | CGEAMDY |
| Part Number | CGEAMDY-Wrench1 |
| Model | CGEAMDY-Wrench1 |
8. Borg & Beck
Brake Pads Fits: Vaux Omega, Vectra 93-99
Borg & Beck - Highly specified compound made from fine metallic fibres consistent with OE formulation. Becktec double rubber shimmed, designed by world leaders to provide improved noise reduction and anti-rattle qualities.
Copper free – environmentally friendly, less corrosive on Disc compared to more coarse formulations as seen on alternative pads. Chamfered and grooved to match consistency of OE design. Integral wear leads, sensors, bolts and accessories to match OE product offer where required.
| Brand | Borg & Beck |
| Manufacturer | Borg & Beck |
| Height | 8.9 cm (3.5 Inches) |
| Length | 4.49 |
| Weight | 1.74 kg (3.84 Pounds) |
| Width | 7.76 |
| Part Number | BBP1487 |
| Model | BBP1487 |
9. MEXITAL
MEXITAL 1 Set Ceramic Motorbike Brake Pads Front and Rear for Z 1000 ZR 1000 10-18 / ZX 1000 Ninja 1000 11-15 / ZX 10 R 08-10 MX379-379-192
MEXITAL - Pollution free-reduce the noise and vibration, provide unrivaled pedal feel;. Weae resistant-high quality formula with Ceramic and Kevlar fiber, Long usable life, High Temperature resistant;.
Certificate sgs and iso9001-professional manufacturer, exceed OEM quality;. Excellent braking power-stable friction coefficient, outstanding performance in wet or dry conditions;. Compatible with z 1000 zr 1000 10-18 / zx 1000 ninja 1000 11-15 / ZX 10 R 08-10 .
| Brand | MEXITAL |
| Manufacturer | MEXITAL |
| Part Number | MX379-379-192 |
| Model | MX379-379-192 |
Bosch - Optimized comfort : premium noise and judder behaviour, good and comfortable pedal feel. Safety first : consistent braking performance in any situation. Optimal performance and safety from the very first braking operations thanks to the Bosch brake pad scorching process. Copper-free pads 
CGEAMDY - Easy installation: without drilling or welding, Remove the original pedal cover and install the new Car Non-Slip Aluminum Alloy Pedial Pads. Scope of application: the accelerator pedal cover measures 11. 5 × 5. 5cm, the brake/clutch pedal cover measures 102 x 7.
CGEAMDY - Application: it is suitable for single-piston, two-piston and four-piston floating calipers, and is suitable for most vehicles with fixed or floating calipers. Can swing 360 degrees, which allows the spreader to be placed in any position. Easy to use: it can be adjusted back and forth for quick disassembly and assembly.
